Set Sunnmore Splitboard + Spark ARC Bindings 2018/19

1.245,00 1.195,00

If desired, the splitboads are delivered with the inteface assembled according to stance and angulations indicated, skins cut to size and specifying us if you are goofy or regular. You can give us all this information in the following form. For any other doubt you can also write here or call us at +34 629 91 40 49.

Name (required)

Email (required)





Splitboard Mendiboard 100% designed for the day of snow powder, looking for an optimum behavior also in another type of snow thanks to its traditional camber profile.

We continue with our traditional camber philosophy to have a large surface of the board in contact with the snow that helps us both in the touring mode and in the riding mode in complicated and different tipes of snow. But this time he has been granted a rocker at the tip of 40cm, not so in the tail not to lose edge and contact board surface, which will delight the lovers of powder snow. The splitboard counts on a flex 7 in the camber for a greater pop and answer of the board and a flex 6 in the nose for a better riding in deep snows.

Its polydamide top sheet gives it a very good ratio of lightness, scratch resistance and durability. We bet once again on the quality of the German House with a sintered Isosport 7500 base, a very durable and speedy base.

2 Years Warranty.


The already consolidated bindings Spark Surge with Tesla system that facilitates the changes of touring mode to ride mode. Its highback slightly more rigid for more demanding riders, allows an angulation from 22º to -13º for greater comfort in a touring mode.

It presents a single climbing wire in two positions, one for soft slopes and one for moderate slopes. The attachment includes the tip with Tesla system and the support of heel or heel. New bindings include the new Pilow Line Straps, 46% lighter, waterproof, ultradurable, comfortable, one-piece molded construction and Whammy Bars for easy climbing wire position changes on the steeps.

Compatible with IBEX crampons, to be able to lock securely in harder snow conditions.


Includes the Voile Pucks needed to place the bindings in riding mode. The pucks are mounted in the angulation and stance required by the client.


Finally the pack includes climbing skins specific for Splitboard. With a width of 130 mm is supplied with a cutter to adjust the width to our splitboard. Its water-resistant Nylon base gives it a perfect grip on all types of snow. Its high quality glue makes it very durable over time. Includes transport bag and storage.

The skins are supplied cut to size of the chosen splitboard.